How Do Technicians Replace the Glass of an Old iPad?

Replace the Glass of an Old iPad

Replacing the damaged back or front glass of an iPad is not an easy task. Technicians who are experts in glass replacement can handle these tasks well. Also, this task requires proper iPad repair skills and knowledge as a slight mistake can make the damage worse. Go through this blog to know the steps technicians follow to replace old iPad glass in Geelong. This is not a simple procedure, so make sure you don’t hesitate to take your iPad to the store if you have any doubts regarding the repair.

 iPad Unglued

A professional technician always prefers a well-lit and clean work area. They will be cutting and heating through a fair amount of glue, so they start using a heat gun at a low setting for 20 seconds to warm the right side of the iPad. After that, they make sure to use a disposable steel razor and start working in between the frame and the glass. Once the razor is in place, they work way up the frame, gently prying up the damaged glass.

They take care to avoid using the razor around the iPad’s upper right-hand corner as this region includes cabling that they don’t want to cut. After that, the technicians who perform iPad screen repair in Ballarat start heating the glue around the top and cutting it using the razor. They stay very careful using the razor at the lower left-hand corner of the iPad, where the Bluetooth and AirPort cables are located.

Pry and Pry Again

After heating the glue of the iPad and using the razor, it becomes easy for the technicians to start prying out the glass with either a prying tool or razor of your choice. They use a heat gun to melt any glue still holding it together, pry up the sides and use their hands to peel the damaged glass from the iPad.

New Glass

Now, you can get rid of your damaged glass by swiping in the new glass. During this step, the professional technicians carefully attach the connectors, put the screws back in to hold the display properly, slide the glass accurately, turn on the iPad and start testing the functionality of the touchscreen.

Hope, you came to know how technicians replace the glass of an old iPad. If you find the content of this blog helpful, don’t forget to share it with your friends, and get back to us for more exciting content!

Comments

Popular posts from this blog

Risks You Can Run Into While Looking for DIY Battery Replacement

Things That You Must Know Before Getting Your iPad’s Screen Replaced

Most Convenient Ways to Extend Your Phone Battery Life