Tips to Fix A Broken Screen Of An Apple Watch In An Effective Way

If you have accidentally broken your Apple iWatch screen, fret not. Stop worrying over spending almost a fortune to get the problem fixed. If you don’t have the budget, simply try our DIY Apple Watch screen repair technique. Among all parts that are brittle in an iWatch, the screen deserves special mention as a lot of users complain of iWatch screen breakage or cracks. It has an OLED display with a glass digitizer which is absolutely delicate. If the watch accidently fell off your wrists or from a place where you had kept it, chances are it has incurred screen damage, which makes it pretty obvious why you need seeing an authorised Apple watch repair expert in Ballarat or lay your own hands on it.

DIY Apple iWatch Repair Tools

Some of the major tools you need for performing the repair work are as follows:

  • Opening picks
  • 1MM Flathead
  • Plastic opening tool

Apple Watch Repairing Tips

Have you got the iFixit tool kit? Now, take out the iOpener and heat it in the microwave oven for around 30 seconds. After heating it, remove it and be careful not to touch its centre. According to experts who already perform Apple watch repairs in Geelong, the iOpener shouldn’t be kept in the microwave oven for more than 30 seconds as it can burst due to overheating.

Keep the iOpener on the surface of the iWatch and leave the tool in the same position for around a minute. Since the screen and the body are tightly attached with very less gap in between, a thin blade is required to separate them. However, care should be taken so that you do not exert excess pressure while you separate the screen. Furthermore be wary of causing cuts to internal connections.

After finding the gap insert tip of an opening pick right under the glass screen. Next, separate the glass from its case and push the pick in a style so that it pressurises the screen to come off. As you pull out the damaged screen make sure you don’t cause damage to the digitizer cables. Lift the screen. Now, shift the screen to the left side and use the opening tool for removing the battery from its bracket. Separate the battery from the connectors and find out if cable connectors are properly secured underneath the metal bracket which remains adhered to iWatch speakers. Use the plastic tool to remove the battery from its case. Now make use of a tweezer in order to detach the digitizer cable from the screen. Put the new screen and voila you have made it!

Since, the process is complicated and involves huge risks we recommend you call up phone repairs experts in Ballarat, who can also perform the job with the same level of precision and expertise.

Remember, it’s your Apple watch which is quite expensive. If you can’t trust yourself with the repair job, always seek help from an expert.

Comments

Popular posts from this blog

Risks You Can Run Into While Looking for DIY Battery Replacement

Things That You Must Know Before Getting Your iPad’s Screen Replaced

Most Convenient Ways to Extend Your Phone Battery Life